For ultra-sturdy combined walls (wide flange beams) with Larssen Z/AZ sheet piles
fits
- Larssen U (European)
- Larssen AZ
works with
Larssen/U-Piles
AZ 12, 13, 14, 17, 18, 19, 25, 26, 27, 34, 36, 38, 46, 48, 50
- steel grade
- ASTM Grade 50 or better,
MARINER™ steel - weight
- ~ 13.29 lb/ft
- thickness
- 0.47 in
downloads
Need To Build a Combined Wall?
The Combined Sheet Pile Tool on iSheetPile.com can help.
Installation
- The beams are delivered with the connectors already attached.
- First, install the king piles (beams) as you would in any combined sheet pile wall application.
- Grasp the sheet piling and thread between the already installed beams.
- All welding seams are a minimum ~6mm (~0.25”).
- Both sides have a continuous minimum tip and toe welding of ~500mm (~20”).
- Both sides are tack welded in the free length between tip and toe welding with ~200mm/m (~8”/yd). The distance from seam to seam is ~800mm (~31.5”) or less.
- In salt water, the water side is continuously welded on the whole pile length. Follow the instructions above for the reverse side of the pile, if it is not in contact with salt water.
PilePro® connectors are exclusively supplied through PilePro Steel, LP.
866-666-7453 | info@pilepro.com